Flightscope
X3C Flightscope Setup
Mevo+ Short Game Setup
Flightscope Mevo Setup
Mevo Setup
Limited Mode in iOS for FlightScope
LIMITED MODE What it is: Limited Mode is a mode of the app that has less capabilities than the normal mode. In this mode you are only able to Practice. Cause: To connect, Flightscope consumes WIFI . IOS devices only support one WiFi connection at a ...
Connecting the Flightscope X2 Elite Via Ethernet
To connect the Flightscope X2 Elite you using the Ethernet you will need to follow these steps. 1. Connect the X2 Elite to the Pc with the Ethernet 2. Power on the PC and the Flightscope if you have not already. 3. Launch the FlightScope set up ...
Putts aren't registering for Mevo
If putts aren’t registering with your Flightscope Mevo A few things you will want to verify are: Make sure that you have the proper angle set when putting. There is a RED “Simulator Angle” tool that comes with the Mevo that helps get you to the ...
Missing Spin Data for Mevo
If E6 does not receive both sidespin and backspin data, E6 will report a “0”. This means 0 data is applied to the shot. Flightscope uses their own ball flight model and If a change needs to be made Flightscope will have to add it in the integration. ...
Connection issues with the Mevo
Unable to get the Mevo + device to connect in the E6 Connect software Make sure the Mevo is updated with the latest firmware Eliminate WiFi interference. “Turn Off” other wifi devices in the home, this is especially true for Apple devices (like ...
Connecting a Flightscope Device to E6 Connect
Connecting your FlightScope device (such as the Mevo+, X3, or Xi) to E6 Connect is a precise process that requires specific alignment and a "one-app-at-a-time" rule to prevent connection conflicts. Here are the step-by-step instructions for a ...