Missing Spin Data for Mevo
If E6 does not receive both sidespin and backspin data, E6 will report a “0”.
This means 0 data is applied to the shot. Flightscope uses their own ball flight model and If a change needs to be made Flightscope will have to add it in the integration. We do not have control over this. Customers who are experiencing this should reach out to Flightscope for further assistance regarding this issue.
https://flightscope.com/contact/usa-support/
Related Articles
Putts aren't registering for Mevo+
If putts aren’t registering with your Flightscope Mevo A few things you will want to verify are: Make sure that you have the proper angle set when putting. There is a RED “Simulator Angle” tool that comes with the Mevo that helps get you to the ...
Connection issues with the Mevo+
Unable to get the Mevo + device to connect in the E6 Connect software Make sure the Mevo is updated with the latest firmware Eliminate WiFi interference. “Turn Off” other wifi devices in the home, this is especially true for Apple devices (like ...
Unable to Connect/ Tracking issues for FlightScope for E6Golf 1.6
Please be sure you have gone through all of these steps to resolve your issues. Please make sure you have a reliable internet connection because the updates we need to complete will run more smoothly and take less time. Below are a few ...
Connecting the Flightscope X2 Elite Via Ethernet
To connect the Flightscope X2 Elite you using the Ethernet you will need to follow these steps. 1. Connect the X2 Elite to the Pc with the Ethernet 2. Power on the PC and the Flightscope if you have not already. 3. Launch the FlightScope set up ...
How to Connect the Flightscope X3 device in E6 Golf 1.6 to Wifi
To Connect the Flightscope X3 device in E6 Golf 1.6 This is a little complicated, as the X3 came out long after E6 Golf was first introduced. And it’s not fully compatible (see below). Open up FlightScope.xml and change the PreferredDevice from ...