Club selection is not an option in E6Golf 1.6 for GSA

• Related Articles

• How to connect GSA golf to E6 Connect

  Connecting your GSA Golf (Golf Simulator Association) hardware to E6 Connect typically involves using the GSA Golf Control Panel as the intermediary to send data to the E6 software. 1. Pre-Connection Setup GSA Interface: Ensure you have the latest ...

• Start up in E6 CONNECT for GSA

  The basic instructions for launching E6 Connect with GSA are: 1. Start the GSA Control Panel (CP) and select E6 Connect from the CP’s main window. 2. Start E6Connect If you are still having problems, you will need to reach out to a GSA ...

• Square Golf PC Connection for E6 CONNECT

  Square Golf Connection Instructions E6 CONNECT PC Power on the Square Golf device Open E6 CONNECT Navigate to SETTINGS>SIMULATOR>SQUARE GOLF>CONFIGURE Select LOCAL HOST and ACCEPT Do not start a session until you complete this step: Press the ...

• GolfTrak + E6 Golf Troubleshooting

  E6 Connect - Instructions and Troubleshooting Setting up your E6 Connection Connecting existing GolfTrak purchase to E6 Activate GolfTrak as Tracking System in E6 App Unbind an existing E6 License E6 Connect System Requirements Check GolfTrak ...

• Connecting a Flightscope Device to E6 Connect

  Connecting your FlightScope device (such as the Mevo+, X3, or Xi) to E6 Connect is a precise process that requires specific alignment and a "one-app-at-a-time" rule to prevent connection conflicts. Here are the step-by-step instructions for a ...