Gun is not tracking accurately, or the performance is inconsistent/laggy in Wild West

Gun is not tracking accurately, or the performance is inconsistent/laggy in Wild West

My gun is not tracking accurately, or the performance is inconsistent/laggy
• This may be caused by having too much light surrounding the simulator
– If the extra light is unavoidable, re-run the calibration (from the
Options screen, accessible on the Main Screen) and the change
the light settings
• You may not be standing at the recommended distance from the screen
– Typically, you will want to stand much farther back than your
simulator’s tee position
– To determine the correct standing position, re-run the calibration
(from the Options screen, accessible on the Main Screen)

    • Related Articles

    • Trouble Shooting within Wild West Shooter

      INSTALLATION TIPS As a general rule, it is important to install Wild West either from the E6 Product launcher or from the standalone installer executable from your desktop. Also, please make sure you have proper user admin privileges before ...

    • Error Codes within Wild West Shooter

      ERROR CODES This section lists error codes and possible solutions. 02 – LIGHTGUN SOFTWARE NOT RUNNING The accompanying tool to run the LightGun software has stopped running or crashed. Reboot the Wild West game to resolve. 04 – LIGHTGUN SOFTWARE NOT ...

    • Misread Shots or Shots Not Tracking in Trutrack 1

      There are a few basic reasons why shots wont register. If you have verified that that the diagnostic utilities are working properly please proceed with the information below. If they are not, please use these links for more information on testing. E6 ...

    • Misread Shots or Shots Not Tracking with the TT2

      There are a few basic reasons why shots wont register. If you have verified that that the diagnostic utilities are working properly, please proceed with the information below. If they are not, please use these links for more information on testing. ...

    • No TruTrack System Found E6 1.6

      TT1 No TruTrack System Found -E6 1.6 Seeing an error message stating “No TruTrack System Found” Double check the TruTrack has power Trutrack 1 will have the light on the green circuit board. Make sure the serial cable is secured both to the computer ...