Setting up offset for Trutrack 2 in E6Golf 1.6

Setting up offset for Trutrack 2 in E6Golf 1.6

If your sensor board needs to be in an offset position you will need to tell the system how much the board is off set and which direction it is off set.

The file you need to edit is here: C:\TruGolf\E6 Golf 1.6\TruTrack.xml

  • Under the <Booth> section at the top of the Xml you will need to change the <Center_Offset Value=“0.00”/>. This will tell the system how many the offset needs to be.

Note: This variable is in feet 18” =1.50 24” = 2.00

  • Next you will need to change the <Analyzer_Mode Value=“0”/> located at the bottom of the <Trutrack specific> portion of the Xml.

This variable will tell the system which direction the board is offset. “0” = Center “1” = Right only “2” = Left only “3” = Dual

    • Related Articles

    • Setting up offset for Trutrack 1 in E6Golf 1.6

      If your sensor board needs to be in an offset position you will need to tell the system how much the board is off set and which direction it is off set. The file you need to edit is here: C:\TruGolf\E6 Golf 1.6\TruTrack.xml Under the <Booth> section ...

    • Launch angle adjustment for Trutrack in E6Golf 1.6

      Experiencing low launch angles on shots expected to be higher. Changes can be made to the Launch angle adjustment This is located in the Trutrack.xml file. 1. Copy and paste “ C:\TruGolf\E6 Golf 1.6 ” into the windows serch box 2. Locate and right ...

    • Shots not registering (Trainer) for Trutrack Mini

      *Optical Diagnostics * E6Golf 1.5 has built in DIAGNOSTICS to help troubleshoot the TruTrack tracking system. Note Optical diagnostics will automatically run if there is a problem when you launch E6Golf 1.5 , Exit Practice or a Round to return to the ...

    • Mode/Club Select/ Bag for the Trutrack Mini

      TTM Mode/Club Select/ Bag. Shots not registering Could not install for a Trutrack Mini or Trutrack Trainer Trutrack Mini is an optical data only tracking system. It must be ran in TTM mode to track shots. To set TTM mode 1. Copy and paste “ ...

    • No Trutrack found Trutrack Mini (Trainer system)

      No Trutrack system found error. Double check the TruTrack has power – _The Mini only has a USB cable used for power and data. Be sure that it is plugged in to the board and the computer. Be sure that you have the FTDI driver installed FTDI.zip (835 ...