Putting registering as a Chip Shots in Trutrack

Putting registering as a Chip Shots in Trutrack

Symptom:
Your TruGolf TruTrack system is reading Putts as Chips

Resolution:
Move the ball further back.
This is likely happening because of how you putt.
If the club head moves with the ball over the sensors, we detect a chip shot.
By moving the ball back, we will get better separation between the ball and club, and register the “Putt”

    • Related Articles

    • Loose processor chip in Trutrack 1

      If you are seeing the no Trutrack found error message or having trouble with shots not registering it could be due to a loose processor chip. You will need a small pair of pliers, or channel locks, and a Phillips head screw driver. 1. Remove the ...

    • Shots not registering (Trainer) for Trutrack Mini

      *Optical Diagnostics * E6Golf 1.5 has built in DIAGNOSTICS to help troubleshoot the TruTrack tracking system. Note Optical diagnostics will automatically run if there is a problem when you launch E6Golf 1.5 , Exit Practice or a Round to return to the ...

    • Misread Shots or Shots Not Tracking in Trutrack 1

      There are a few basic reasons why shots wont register. If you have verified that that the diagnostic utilities are working properly please proceed with the information below. If they are not, please use these links for more information on testing. E6 ...

    • No Trutrack system found error in E6 Connect

      Seeing an error message stating “No TruTrack System Found” Trutrack 2 System Double check the TruTrack has power Trutrack 2 The power indicator light on the control box should be showing red light Make sure the serial cable is secured both to the ...

    • No TruTrack System Found E6 1.6

      TT1 No TruTrack System Found -E6 1.6 Seeing an error message stating “No TruTrack System Found” Double check the TruTrack has power Trutrack 1 will have the light on the green circuit board. Make sure the serial cable is secured both to the computer ...