Truflight & Truflight 2 Turf requirements for Trugolf

Truflight & Truflight 2 Turf requirements for Trugolf

Truflight & Truflight 2 Turf requirements
The turf that is needed to be used with the Truflight systems is called PL307. It can be purchased from Grass Turf Mills. The visual surface for the cameras is 8’X8' so you will need to cover at least that amount.
Having the proper turf installed is important for calibrating the systems. The use of another turf is not supported and we cannot guarantee the tracking system will calibrate and function properly.

    • Related Articles

    • How to Connect TruGolf Truflight 2 to E6 Golf 2026

      Symptom: You have installed E6 Golf 2026 but when trying to select tracking system its showing as not connected. APOGEE and E6 Connect are connected and working as expected, but the APOGEE is showing as disconnected. 1. Driver and Utility ...

    • Troubleshooting / Calibration with TruFlight 1

      Shots stop registering with your TruFlight device. First thing to check is that there isn’t any debris in the view of the camera. Any debris in the view of the camera will cause the Trigger camera to false trigger and not actually record the ball ...

    • Manual for the TruFlight 1

      TruFlight_Manual_1.0.pdf (3 MB)

    • Properly use and maintain a Trugolf simulator for the TruFlight 1

      Do not walk or stand on the sensor board, this could cause the optical circuit board to break.. Keep golfers out of the swinging area, they might get hit and die. Make sure that the floor is clear of debris that will bee seen be the ball cameras * ...

    • Calibrate a Trugolf system in E6 Connect

      Calibrate a Trugolf TruTrack system in E6 Connect 1. Launch E6 Connect 2. Click on the gears (Settings) icon 3. Select Your Trugolf tracking system and then click on configure 4. Select your simulator type and click on configure. 5. Edit and click ...