Launch angle adjustment for Trutrack in E6Golf 1.6

Launch angle adjustment for Trutrack in E6Golf 1.6

Experiencing low launch angles on shots expected to be higher.

Changes can be made to the Launch angle adjustment
This is located in the Trutrack.xml file.
1. Copy and paste “ C:\TruGolf\E6 Golf 1.6 ” into the windows serch box
2. Locate and right click on the Trutrack.xml file and select edit or open with notepad.
3. Locate the “ Launch angle adjustment ”.
4. Edit as needed based of the example below.

Launch angle adjustment <yFinalLocationMicLocationCompensationFactor Value=“1.000000”/>
By changing the value *“1.000000”*to “1.100000” is equal to a 10% increase
20% increase would be equal to "1.2.00000"

    • Related Articles

    • How To Calculate Launch Angle

      To determine Launch Angle (for real) You need to know the Distance to Screen (inches) You need to know the Height of the ball impact (inches) Example: Enter this in Google: atan(38/138) in degrees You need to specify “degrees” otherwise you will get ...

    • Shots not registering (Trainer) for Trutrack Mini

      *Optical Diagnostics * E6Golf 1.5 has built in DIAGNOSTICS to help troubleshoot the TruTrack tracking system. Note Optical diagnostics will automatically run if there is a problem when you launch E6Golf 1.5 , Exit Practice or a Round to return to the ...

    • Mode/Club Select/ Bag for the Trutrack Mini

      TTM Mode/Club Select/ Bag. Shots not registering Could not install for a Trutrack Mini or Trutrack Trainer Trutrack Mini is an optical data only tracking system. It must be ran in TTM mode to track shots. To set TTM mode 1. Copy and paste “ ...

    • Setting up offset for Trutrack 1 in E6Golf 1.6

      If your sensor board needs to be in an offset position you will need to tell the system how much the board is off set and which direction it is off set. The file you need to edit is here: C:\TruGolf\E6 Golf 1.6\TruTrack.xml Under the <Booth> section ...

    • No Trutrack found Trutrack Mini (Trainer system)

      No Trutrack system found error. Double check the TruTrack has power – _The Mini only has a USB cable used for power and data. Be sure that it is plugged in to the board and the computer. Be sure that you have the FTDI driver installed FTDI.zip (835 ...