Hitting Screen Maintenance for Trugolf

Hitting Screen Maintenance for Trugolf

Instructions for Cleaning your TruGolf Projector Screen

1) Gently brush the affected area to remove loose grime

2) Test your cleanser
Use a mild fabric cleanser with a gentle cloth to spot test a portion of the screen that isn’t noticeable.
Allow the test area to set (10 minutes or so) and ensure there is not discoloration, and it doesn’t change the consistency of the material. (it shouldn’t stiffen or loosen the screen material)

3) Spot clean the screen as needed.

Some spots may be harder to clean than others.
In those situations you may need to use a more abrasive cleanser and/or application (like a magic eraser)
Be careful, as abrasion increases, so too does the damage to the screen.

We do not recommend washing and/or drying the screen, as your screen may not be compatible with this type of handling.

Delivery and storage Wrinkles are normal and will go away over time with use of the simulator.
Screens Should be rolled for storage

General Tips to Ensure a Long Screen Life

  • Do not uses scuffed, chipped, or cut balls to prevent screen damage
  • Do not use real golf tees only rubber sit on top models.
  • To keep the screen clean, don’t use dirty balls or clubs
  • Do not used Marked balls, as the marking agent can come off on the screen and is very hard to clean.

    • Related Articles

    • Adjusting the Projector to Fit the Screen (Vista)

      NOTE: The projected image for a Vista 8 and 12 do not fill the screen. The image will appear letterboxed. Letter box example The image on a Vista 10 Should pretty much fill the screen. We’ll be using the Optima Projector on the Left of this image. ...

    • Projector Light Status for Epson

      Projector Light Status The lights on the projector indicate the projector status and let you know when a problem occurs. Check the status and color of the lights and look for a solution in the table here. 1 WLAN (Wireless LAN) light (PowerLite Home ...

    • Projector troubleshooting

      Projector is shutting down during use or you are seeing a lamp light on. The projector could be overheating. Making sure that there is proper ventilation for the projector at both the intake and exhaust vents. If your projector is being used in a ...

    • Projector format and Resolution settings

      You might be having projected image issues related to the set up of the projector. NOTE: Make sure that you are using the feet or wedge provided for lifting the back of the projector to allow image to project properly onto the screen. Vista 8 Format ...

    • Vivitek DW884ST Projector

      Vivitek DW884ST https://www.projectorcentral.com/pdf/projector_manual_9087.pdf Replacement Lamp Araca 5811119560-SVV Replacement Projector Lamp with Housing for Vivitek DX881ST DX883ST DW882ST DW884ST DX813 DW814 Projector Lamp