Attached is a video that shows the Center Mat Replacement on a Fiberbuilt Mat.

• Remove the 8 screws (2 on the center Mat, and 2 on the Right Mat)
• Carefully remove the Right, then Center Mat pieces
• Insert the new Center Mat Replacement Piece
• NOTE: Be sure the LOGO on the new Center Piece aligns with the Left Piece (face the same way)
• Use a Rubber Mallet to snug the pieces to fit.
• Replace the Screws--do NOT over tighten the screws
• Insert the Right Mat Piece...snug piece with rubber mallet and replace the screws