Not tracking putts with TM4 in E6Golf 1.6

Not tracking putts with TM4 in E6Golf 1.6

If you are unable to get putting to work inside of the E6 software you may need to make the following change.

  • There is a value in TM3e.xml “<EnablePutting Value=“True”/>” This value needs to be true for putting to work.

If this doesn’t resolve the issue please contact Trackman.


    • Related Articles

    • Trackman Calibration Utility for E6 1.6

      Shots aren’t registering or calibration is off when using E6 1.6 To calibrate the Track man device inside of E6 1.6 you will need to launch the utility inside of the E6 software. This Excludes the TM4 if running in “kiosk” mode. To launch the utility ...

    • Misread Shots or Shots Not Tracking for TM in E6Golf 1.6

      Please make sure you have a reliable internet connection because the updates we need to complete will run more smoothly and take less time. Below are a few troubleshooting steps in order to get your device tracking more accurately or to connect. Is ...

    • Putting Options Explained in E6Golf 1.6

      Gimme Range – This is the distance within which you automatically hole out with a one-putt. Inside 2 / 4 / 6 / 8 / 10 / feet Player Decides – When using this setting the player has the option to decide how many putts the player would have taken. ...

    • How do I setup E6 up with the TM4 in E6 Golf 1.6

      Step 1: Make sure that E6 1.6 is fully installed on the PC. Download of latest version is available at https://e6golf.com/update/ Step 2: Load the latest version of TM4 firmware, which enables putting capabilities. Update will be available in TPS ...

    • Shot registering backwards with TM in E6Golf 1.6

      If you are seeing shots registering backwards it might be due to out of date Trackman firmware and or E6Golf software. You will need to check and update both if this is the case. TrackMan Studio updates and/or firmware updates? How to update Trackman ...