How do I setup E6 up with the TM4 in E6 Golf 1.6
Step 1: Make sure that E6 1.6 is fully installed on the PC. Download of latest version is available at https://e6golf.com/update/
Step 2: Load the latest version of TM4 firmware, which enables putting capabilities. Update will be available in TPS once the computer is online and TPS is open. Follow the on-screen instructions. The firmware is available in the software, and also as a link below on this page.
Step 3: Option a) Run the Tracking system configuration utility From C:\Program Files\TruGolf\E6 Golf 1.6 and select TM4 as the model.
Step 4: Option b) skip this step Copy the newly downloaded Tm3e.xml file to this location on your PC —> C:\TruGolf\E6 Golf 1.6
- This reestablishes the strike and putting position to 8 ft, which should allow capture at most all distances indoors.
Related Articles
Connecting Trackman to E6 Connect
Connecting the TrackMan via Wi-Fi: Please use the link below for information on how to Connect the Trackman device in E6 Connect. https://e6golf.com/e6-connect/manual/#trackman Other Helpful links: https://mytrackman.com/support/software ...
Quick start guide for the Trackman 4 - TM4
This is the TM4 Quickstart guide form Trackman It does not relate to E6 Golf 2015-12-21_Quick_Start_Guide_PDF_interactive.pdf (657 kB)
Alignment for Trackman
On of our users noticed that his Trackman alignment was off in E6 CONNECT, though still working in TPS All Alignment and Shot Data is controlled by Trackman--there are no adjustments in E6 CONNECT to modify the shot data. Original Issue: When playing ...
Trackman Calibration Utility for E6 1.6
Shots aren’t registering or calibration is off when using E6 1.6 To calibrate the Track man device inside of E6 1.6 you will need to launch the utility inside of the E6 software. This Excludes the TM4 if running in “kiosk” mode. To launch the utility ...
Shot registering backwards with TM in E6Golf 1.6
If you are seeing shots registering backwards it might be due to out of date Trackman firmware and or E6Golf software. You will need to check and update both if this is the case. TrackMan Studio updates and/or firmware updates? How to update Trackman ...