Enabling SDK Output for Trackman 3e in E6Golf 1.6

Enabling SDK Output for Trackman 3e in E6Golf 1.6

Go into the TPS under settings and check the box that states “enable SDK output mode”.

For further support with Trackman products visit http://trackmangolf.com/support

    • Related Articles

    • Quick start guide for the Trackman 4 - TM4

      This is the TM4 Quickstart guide form Trackman It does not relate to E6 Golf 2015-12-21_Quick_Start_Guide_PDF_interactive.pdf (657 kB)

    • Alignment for Trackman

      On of our users noticed that his Trackman alignment was off in E6 CONNECT, though still working in TPS All Alignment and Shot Data is controlled by Trackman--there are no adjustments in E6 CONNECT to modify the shot data. Original Issue: When playing ...

    • Connecting Trackman to E6 Connect

      Connecting the TrackMan via Wi-Fi: Please use the link below for information on how to Connect the Trackman device in E6 Connect. https://e6golf.com/e6-connect/manual/#trackman Other Helpful links: https://mytrackman.com/support/software ...

    • Trackman Calibration Utility for E6 1.6

      Shots aren’t registering or calibration is off when using E6 1.6 To calibrate the Track man device inside of E6 1.6 you will need to launch the utility inside of the E6 software. This Excludes the TM4 if running in “kiosk” mode. To launch the utility ...

    • How do I setup E6 up with the TM4 in E6 Golf 1.6

      Step 1: Make sure that E6 1.6 is fully installed on the PC. Download of latest version is available at https://e6golf.com/update/ Step 2: Load the latest version of TM4 firmware, which enables putting capabilities. Update will be available in TPS ...