Trackman Calibration Utility for E6 1.6

Trackman Calibration Utility for E6 1.6

Shots aren’t registering or calibration is off when using E6 1.6
To calibrate the Track man device inside of E6 1.6 you will need to launch the utility inside of the E6 software.
This Excludes the TM4 if running in “kiosk” mode.

To launch the utility
1 Launch E6 1.6
If the Trackman is being seen by E6 you will see the tracking tab.
2 Click on the “Tracking” tab.




3 Click on the “Calibration” tab.



4 In the utility you will need to first select the proper distance in the column to the right
5 The next step is to align the cross hairs to the center bottom of the screen (Image)
6 Click apply and exit.
If you are seeing this error message you will need to check the connection of the device and try again.




If you are still having tracking related issues after calibration you will need to verify calibration in the TPS software and contact the Trackman support. support@trackmangolf.com




    • Related Articles

    • Misread Shots or Shots Not Tracking for TM in E6Golf 1.6

      Please make sure you have a reliable internet connection because the updates we need to complete will run more smoothly and take less time. Below are a few troubleshooting steps in order to get your device tracking more accurately or to connect. Is ...
    • Shot registering backwards with TM in E6Golf 1.6

      If you are seeing shots registering backwards it might be due to out of date Trackman firmware and or E6Golf software. You will need to check and update both if this is the case. TrackMan Studio updates and/or firmware updates? How to update Trackman ...
    • Connecting Trackman to E6 Connect

      Connecting the TrackMan via Wi-Fi: Please use the link below for information on how to Connect the Trackman device in E6 Connect. https://e6golf.com/e6-connect/manual/#trackman Other Helpful links: https://mytrackman.com/support/software ...
    • Why is club data missing on some shots? for TM for E6Golf 1.6

      The main reason for not showing club data at some shots is that if not 100% of the data is captured on a given shot, all data on that shot is rejected automatically. As the saying goes; no club data is better than inaccurate club data. 1. Setup of ...
    • Not tracking putts with TM4 in E6Golf 1.6

      If you are unable to get putting to work inside of the E6 software you may need to make the following change. There is a value in TM3e.xml “<EnablePutting Value=“True”/>” This value needs to be true for putting to work. If this doesn’t resolve the ...