Putts are not being read in the TruFlight 2

Putts are not being read in the TruFlight 2

Symptom:

  • Putts are not being read by the TruFlight 2, or are being read poorly.

This is very likely due to having the wrong Ball Size defined in the Configuration Utility.

Resolution:
Open the TruFlight 2 Config Utility
Open Advanced Settings


Look for TFBallSize and place the number to 22


Apply Changes

And Close

How do I know if I have a TruFlight 1 or TruFlight 2?
Answer: A TruFlight 2 does not use a floor sensor. It has a Club Head Camera and Ball Cameras.

    • Related Articles

    • Manual for the TruFlight 1

      TruFlight_Manual_1.0.pdf (3 MB)

    • Truflight & Truflight 2 Turf requirements for Trugolf

      Truflight & Truflight 2 Turf requirements The turf that is needed to be used with the Truflight systems is called PL307. It can be purchased from Grass Turf Mills. The visual surface for the cameras is 8’X8' so you will need to cover at least that ...

    • Troubleshooting / Calibration with TruFlight 1

      Shots stop registering with your TruFlight device. First thing to check is that there isn’t any debris in the view of the camera. Any debris in the view of the camera will cause the Trigger camera to false trigger and not actually record the ball ...

    • Properly use and maintain a Trugolf simulator for the TruFlight 1

      Do not walk or stand on the sensor board, this could cause the optical circuit board to break.. Keep golfers out of the swinging area, they might get hit and die. Make sure that the floor is clear of debris that will bee seen be the ball cameras * ...

    • No Ball Detected within TruFlight 2

      Symptom: you are finding that the indicator is stating No Ball Detected and are unable to get this to change over to Ready by moving the golf ball. Potential Causes: 1. Your Club Camera may have shifted out of position and needs to be physically ...