No ball detected / Ball streak timing on the TruFlight 2

No ball detected / Ball streak timing on the TruFlight 2

No ball detected / Ball streak timing

Symptoms

  • Seeing a no ball detected error when taking a shot.
  • Shots not registering all the time.
  • Shots registering inaccurately.

1. Click Show Club Camera.
2. Click Start.
3. Hit test shot.
4. Select Show Ball Camera.
5. Examine image of both right and left Camera to see where the ball
enters into the frame.

To adjust where the ball appears in the frame adjust the Ball Trigger
Distance setting under Show Club Camera area.
Sliding to a higher number captures the shot later (effectively
moving the ball to the left), sliding to the lower number captures
the shot earlier (moving the ball to the right).

6. Adjust so that the ball appears in the middle of the frame, this will
require trial and error.

7. Click Save Changes


    • Related Articles

    • No Ball Detected within TruFlight 2

      Symptom: you are finding that the indicator is stating No Ball Detected and are unable to get this to change over to Ready by moving the golf ball. Potential Causes: 1. Your Club Camera may have shifted out of position and needs to be physically ...

    • Troubleshooting / Calibration with TruFlight 1

      Shots stop registering with your TruFlight device. First thing to check is that there isn’t any debris in the view of the camera. Any debris in the view of the camera will cause the Trigger camera to false trigger and not actually record the ball ...

    • Single ball camera for the TruFlight 2

      How to install /Reinstall he custom build for TF2 SC • Install the TruFlight 2 Software (current version: https://autoupdate.e6golf.com/utilities/TruFlight_2_Utilities_Drivers_1.3.0.1.exe) • Do a Standard E6 CONNECT Installation (current ...

    • Manual for the TruFlight 1

      TruFlight_Manual_1.0.pdf (3 MB)

    • Truflight & Truflight 2 Turf requirements for Trugolf

      Truflight & Truflight 2 Turf requirements The turf that is needed to be used with the Truflight systems is called PL307. It can be purchased from Grass Turf Mills. The visual surface for the cameras is 8’X8' so you will need to cover at least that ...