Tittle / SLX Connection to E6 Connect

Tittle / SLX Connection to E6 Connect

The SLX sensor uses Bluetooth Low Energy (BLE) to connect directly to the app. Do not pair the sensor in your iPad or PC's system Bluetooth settings.

  1. Power On: Press and hold the power button on the SLX sensor for about 3-5 seconds until the LED begins to flash.

  2. Close Other Apps: Ensure the SLX Connect app is completely closed. If it is running in the background, it may "steal" the Bluetooth connection, preventing E6 Connect from seeing the sensor.

  3. Launch E6 Connect: Open the software and log in.

  4. Configure the Simulator:

    • Go to Settings (blue gear icon) > Simulator.

    • Under Tracking System, select SwingLogic - SLX (or TittleX if you are a left-handed player, as this serves as a common workaround for orientation).

    • Click Configure.

  5. Pairing: The software should automatically scan and find your sensor. Once the status turns green or says "Connected," you are ready to play.

Troubleshooting Tips
  • Sensor Not Found: If the device doesn't appear, toggle your Bluetooth Off and On in your device settings, then restart E6 Connect.

  • License "Demo Mode": If you only see one course (Aviara), your license isn't "Bound." Go to Settings > Info & Help > Simulator Binding to unbind any old licenses and re-bind your "SLX/Tittle Standard" license.

  • Sensitivity Issues: If your swings aren't registering, go to the Configure menu mentioned in Step 4 and adjust the Sensitivity to "High" or "Very High," especially for putts and short chips.

    • Related Articles

    • How to use E6 CONNECT with the SC4

      How to use E6 CONNECT with the SC4 Connecting a Voice Caddie device (specifically the SC4) to E6 Connect allows you to transform your portable launch monitor into a full simulator. While older models like the SC300i are great for data, only the SC4 ...

    • Connecting a Flightscope Device to E6 Connect

      Connecting your FlightScope device (such as the Mevo+, X3, or Xi) to E6 Connect is a precise process that requires specific alignment and a "one-app-at-a-time" rule to prevent connection conflicts. Here are the step-by-step instructions for a ...

    • Square Golf PC Connection for E6 CONNECT

      Square Golf Connection Instructions E6 CONNECT PC Power on the Square Golf device Open E6 CONNECT Navigate to SETTINGS>SIMULATOR>SQUARE GOLF>CONFIGURE Select LOCAL HOST and ACCEPT Do not start a session until you complete this step: Press the ...

    • How to connect GSA golf to E6 Connect

      Connecting your GSA Golf (Golf Simulator Association) hardware to E6 Connect typically involves using the GSA Golf Control Panel as the intermediary to send data to the E6 software. 1. Pre-Connection Setup GSA Interface: Ensure you have the latest ...

    • Shots seem shorter in E6 Connect than in real life with Flightscope

      When shots appear shorter in E6 Connect compared to your real-world performance or even other apps like FS Golf, it is typically due to environment settings or physical setup, a "misalignment" between the radar and the software. 1. Check the "Tee ...