Putts and slow shots not registering in E6 software

Putts and slow shots not registering in E6 software

Symptoms:

  1. You are experiencing shots not registering—particularly Putts, short or slow swing shots such as chips and approach shots—this is most commonly due to the E6 software not receiving the necessary data to process the shot.


To verify this, please contact Garmin to confirm the data connection. We understand this issue can be frustrating and sincerely apologize for the inconvenience.

    • Related Articles

    • Chip shots / putts do not appear in E6 Connect with Garmin devices

      Symptoms: Chip shots and putts are not displaying in E6 CONNECT with Garmin. No Short shots are being registered when using E6 CONNECT with Garmin. Explanation: Chip shots and putts often do not appear on E6 Connect software with Garmin devices ...

    • Garmin R50 Disconnecting

      Symptoms: Garmin R50 disconnects during play Unable to complete a round of golf before Garmin R50 loses connection. The Garmin Approach R50 is unique because, unlike the R10, it creates its own Wi-Fi Hotspot to communicate with E6 Connect. Frequent ...

    • Garmin R10 No Longer Connects to the E6 Software after Windows Update

      Symptom: Garmin R10 is no longer connected to E6 software after Windows update. Unable to connect Garmin R10 device to E6 software. Windows updates often reset security and network settings that are critical for the "bridge" connection between the ...

    • Won't connect / connection issues with PC Software for Garmin R10

      Symptoms You attempt to “Test Connection” in the Garmin R10 Software, but it continues to Fail You select to “Start Session” and run the PC application in the Garmin R10 Software, but the device never connects properly Things to Check When on the ...

    • Garmin R50 Connection Instructions for E6 Connect

      Symptom: Garmin R50 is not connected to E6 Connect. Error message in E6 software stating that Garmin R50 is not connected. To connect your Garmin Approach R50 to E6 Connect, you must establish a direct communication link between the R50's built-in ...