Tracking issues in E6 CONNECT for ES

Tracking issues in E6 CONNECT for ES

Symptoms

  • Distances are short/long
  • Rollout is short/long
  • Ball is pushing to the left or the right

E6 is simulating the ball flight for the ES Devices so there are a few settings that can effect the ball flight.

Check the following:
• Green Speed – Effects ball rollout on greens.
• Green Hardness – Effects the bounce of a ball upon approach.
• Fairway Hardness – Effects ball rollout on the fairway.
• Terrain Penalty – Effects ball speed in rough/sand/and other terrain types “off” the normal play area.
• Wind – Effects the flight path of the ball.
• Elevation – Effects the resistance of the ball flight.

E6 doesn’t have any other tools to effect ball flight for an Ernest Sports device.
We recommend that you calibrate the device, and be sure that you are following Ernest Sports’ suggestions for optimal ball registration. If you are still having issues with Tracking you will need to reach out to Ernest Sports Support @ info@ernestsport.com or 770-734-1413

Here is a link to the E6 Connect Manual for information on how https://e6golf.com/e6-connect/manual/

    • Related Articles

    • Connecting a Flightscope Device to E6 Connect

      Connecting your FlightScope device (such as the Mevo+, X3, or Xi) to E6 Connect is a precise process that requires specific alignment and a "one-app-at-a-time" rule to prevent connection conflicts. Here are the step-by-step instructions for a ...

    • ES 20/20 Troubleshooting - E6 CONNECT

      Symptom: Unable to connect your Ernest Sports 20/20 to E6 CONNECT There isn’t much required to get the Ernest Sports 20/20 working with E6 CONNECT Make sure the 20/20 is powered Check the 20/20 calibration inside the Ernest Sports software..be sure ...

    • Player Troubleshooting for ES12

      Where do I find the code to activate my ES12 Player? The activation code can be found in two different places: on the Quick Start Manual included in the box and on the back casing of the ES12 Player. How do I connect my ES12 Player to the free ES12 ...

    • How to connect GSA golf to E6 Connect

      Connecting your GSA Golf (Golf Simulator Association) hardware to E6 Connect typically involves using the GSA Golf Control Panel as the intermediary to send data to the E6 software. 1. Pre-Connection Setup GSA Interface: Ensure you have the latest ...

    • Tittle / SLX Connection to E6 Connect

      The SLX sensor uses Bluetooth Low Energy (BLE) to connect directly to the app. Do not pair the sensor in your iPad or PC's system Bluetooth settings. Power On: Press and hold the power button on the SLX sensor for about 3-5 seconds until the LED ...