Distance adjustment in E6Golf 1.6

Distance adjustment in E6Golf 1.6

Overall shot distance with all club types are either short or long

  • Ball to screen distance is good
  • elevation setting is good
  • xml is properly configured with the optical sensor spacing.

If above is verified you can make adjustments to the fElevationOffset=“4200.00” found in the defaults.stg file. Increasing the 4200.00 to a higher number will increase the distance of the shots. Reverse for less distance. It is recommended to do this in 1000 increments as the exact percentage of yardage is unknown.

<EnvironmentSettings GreenHardness=“SOFT GREENS” OverrideTerrainSettings=“False” bTerrainPenalty=“False” bUseCourseElevation=“False” fDefaultElevation=“0.00” fElevationOffset=“4200.00” fPracticeElevation=“0.00” iFairwayHardness=“MODERATE FAIRWAYS” iGreenSpeed=“SLOW GREENS” iTimeOfDay=“EVENING” iWeather=“PARTLY CLOUDY” iWindSpeed=“NO WIND”/>

    • Related Articles

    • Elevation Bug in FlightScope for E6 Golf 1.6

      Unfortunately, Elevation settings inside of E6 do not have any effect when using a FlightScope. There is no ETA on when this will be fixed.

    • Side Spin Adjustment in E6Golf 1.6

      How To Change The Side Spin Adjustment MPORTANT – Back up your XML file before you make any changes. In the XML file dedicated to your tracking device you will need to locate the Side Spin value <Percent_SideSpin Value=“100.00”/>: ...

    • Transfer Authorization: in E6 Golf 1.6

      Moving (Transferring) your E6 Golf 1.6 License (Authorization) between computers Symptoms • You recently bought a new computer, and need to move your license/authorization to the new machine • You only have the Wade Hampton Golf Course • You recently ...

    • How to Connect the Flightscope X3 device in E6 Golf 1.6 to Wifi

      To Connect the Flightscope X3 device in E6 Golf 1.6 This is a little complicated, as the X3 came out long after E6 Golf was first introduced. And it’s not fully compatible (see below). Open up FlightScope.xml and change the PreferredDevice from ...

    • How do I setup E6 up with the TM4 in E6 Golf 1.6

      Step 1: Make sure that E6 1.6 is fully installed on the PC. Download of latest version is available at https://e6golf.com/update/ Step 2: Load the latest version of TM4 firmware, which enables putting capabilities. Update will be available in TPS ...