No Ball on Screen in E6 CONNECT
SYMPTOMS
- You do not see the ball on screen
This change was added to make putting feel more natural by improving the visualization of distance from your physical ball position to the pin.
E6 CONNECT attempts to put the rendered view where your projected image is...so if your screen is 12' from the tee, that’s the view you see.
You can optimize this view in Settings under SETTINGS > SIMULATOR > PROJECTION DEMENSIONS
*And if you want to force the ball to appear on screen all the time....Change “Ball to Screen” to 0' 0"
Related Articles
E6 CONNECT Mini Map Appearing In Center of Screen
Symptom: E6 CONNECT map appears in the center of the screen when playing a course (see image). ISSUE is caused by when customer has E6 Connect to open to MONITOR and not PROJECTOR, then by moving the E6 Connect screen to the projector via WINDOWS KEY ...Full screen mode in E6 Connect
Your E6 Connect is launching in a window ( Windowed Mode) and you want it to be full screen. 1. Launch the E6 connect software 2. Click on the settings (Gears) icon at the bottom of the screen 3. Click on the “Video” tab and select “Full Screen” ...How to connect GSA golf to E6 Connect
Connecting your GSA Golf (Golf Simulator Association) hardware to E6 Connect typically involves using the GSA Golf Control Panel as the intermediary to send data to the E6 software. 1. Pre-Connection Setup GSA Interface: Ensure you have the latest ...How to use E6 CONNECT with the SC4
How to use E6 CONNECT with the SC4 Connecting a Voice Caddie device (specifically the SC4) to E6 Connect allows you to transform your portable launch monitor into a full simulator. While older models like the SC300i are great for data, only the SC4 ...How to Configure Offset in E6 CONNECT
You want to offset your hitting mat to the right or left 1. Launch the E6 CONNECT software 2. Select the Settings (Blue box at the bottom) 3. Select Simulator in left column 4. Select Projector Dimensions in middle column 5. Select the direction that ...