E6 CONNECT Mini Map Appearing In Center of Screen
Symptom:
E6 CONNECT map appears in the center of the screen when playing a course (see image).
ISSUE is caused by when customer has E6 Connect to open to MONITOR and not PROJECTOR, then by moving the E6 Connect screen to the projector via WINDOWS KEY and ARROW keys.
Solution:
• Open E6 Connect
• Go to Settings (GEAR ICON)
• Navigate to SYSTEM CONFIG
• In the Center Column, click on VIDEO
• Adjusted to Full Screen and to your preferred display, ensure the SSAA is in on the proper setting for your Windows System.
• Go to Settings (GEAR ICON)
• Navigate to SYSTEM CONFIG
• In the Center Column, click on VIDEO
• Adjusted to Full Screen and to your preferred display, ensure the SSAA is in on the proper setting for your Windows System.
Related Articles
No Ball on Screen in E6 CONNECT
SYMPTOMS You do not see the ball on screen This change was added to make putting feel more natural by improving the visualization of distance from your physical ball position to the pin. E6 CONNECT attempts to put the rendered view where your ...Full screen mode in E6 Connect
Your E6 Connect is launching in a window ( Windowed Mode) and you want it to be full screen. 1. Launch the E6 connect software 2. Click on the settings (Gears) icon at the bottom of the screen 3. Click on the “Video” tab and select “Full Screen” ...4K Resolution in E6 Connect
4K is defined as: 3840 x 2160 pixels. 4K is a 16:9 image ratio The resolution of the game is determined by your Video Card and Projector settings. It’s likely the Video Card and Projector will support different resolutions. The overlap of Resolutions ...Booth Configurations settings Defined in E6 Connect
E6 Connect Configurations settings Defined Note: The settings not listed are not required for set up and should only be adjusted by an experienced installer Ball On Screen Distance – This will tell the system when the send shot if no acoustic option ...How to connect GSA golf to E6 Connect
Connecting your GSA Golf (Golf Simulator Association) hardware to E6 Connect typically involves using the GSA Golf Control Panel as the intermediary to send data to the E6 software. 1. Pre-Connection Setup GSA Interface: Ensure you have the latest ...