How to Configure Offset in E6 CONNECT

How to Configure Offset in E6 CONNECT

You want to offset your hitting mat to the right or left
1. Launch the E6 CONNECT software
2. Select the Settings (Blue box at the bottom)


3. Select Simulator in left column



4. Select Projector Dimensions in middle column



5. Select the direction that you want to move the TEE POSITION
Your options are Right/Left/Dual tee

  • Once you have selected your the direction of the offset, you need to select how much in feet and inches that the booth is off center in that particular direction.


6. Select Accept



    • Related Articles

    • No Ball on Screen in E6 CONNECT

      SYMPTOMS You do not see the ball on screen This change was added to make putting feel more natural by improving the visualization of distance from your physical ball position to the pin. E6 CONNECT attempts to put the rendered view where your ...

    • How to connect GSA golf to E6 Connect

      Connecting your GSA Golf (Golf Simulator Association) hardware to E6 Connect typically involves using the GSA Golf Control Panel as the intermediary to send data to the E6 software. 1. Pre-Connection Setup GSA Interface: Ensure you have the latest ...

    • How to set upE6 Connect with your Kit for FSG Kit

      https://kitsupport.fullswinggolf.com/hc/en-us/articles/4811507014551-How-to-Set-Up-E6-Connect How to Set Up E6 Connect Use the following steps to set up the KIT for use with E6 Connect. 1. Set Up and Configure Your KIT If you are setting up your KIT ...

    • Connecting a Flightscope Device to E6 Connect

      Connecting your FlightScope device (such as the Mevo+, X3, or Xi) to E6 Connect is a precise process that requires specific alignment and a "one-app-at-a-time" rule to prevent connection conflicts. Here are the step-by-step instructions for a ...

    • How to use E6 CONNECT with the SC4

      How to use E6 CONNECT with the SC4 Connecting a Voice Caddie device (specifically the SC4) to E6 Connect allows you to transform your portable launch monitor into a full simulator. While older models like the SC300i are great for data, only the SC4 ...