Connecting the Garmin R10 device to E6 Golf 2026

Connecting the Garmin R10 device to E6 Golf 2026

1. Open E6 Golf 2026

2. Enter the SETTINGS MENU in the upper left-hand corner of the screen.

3. Select the TRACKING SYSTEMS button.

4. In the Tracking Systems list, select Garmin.

5. Power on your Garmin device.

6. Open the GARMIN GOLF App.

7. Click on MORE – GARMIN DEVICES to ensure that your device is connected to the app.

8. Click BACK – GOLF SIM – E6 GOLF 2026 – PLAY ON PC.

9. When/if prompted click on SETTINGS to ENTER HOST & PORT INFO.

10. Refer to the IP ADDRESS and PORT in E6 Golf 2026 to match the settings within the Garmin App.

11. Click TEST CONNECTION.

12. When successful click on START SESSION.


    • Related Articles

    • Connecting the Garmin R50 Device to E6 Golf 2026

      1. Enable the R50 Partner Mode On the Garmin Approach R50 touchscreen, sign in to your Garmin account. Scroll to the farthest tile on the right-hand side of the main menu. Select Partner Software (or Connect on some firmware versions). Choose E6 Golf ...

    • Connecting a FlightScope device to E6 Golf 2026

      Power on the FlightScope. Open the Wi-Fi Settings on the PC you want to connect to. In the network list, find the FlightScope device by its serial number (S/N for short). This can be found on a label on the back of the device. Enter the device’s ...

    • Connecting the Rapsodo device to E6 Golf 2026

      Connecting your Rapsodo MLM2PRO to E6 Golf 2026 (or E6 Connect) requires a specific "authentication" step that must be performed every 24 hours. Because the Rapsodo unit uses a cloud-based verification system, your smartphone acts as the key to ...

    • Connecting a Square Golf to E6 Golf 2026

      Connecting your Square Golf launch monitor to E6 Golf 2026 is a straightforward process, as the device connects natively over Bluetooth without requiring a third-party bridge app. 1. Preparation & Environment Lighting: Square Golf is an infrared (IR) ...

    • Connecting a GolfJoy to E6 Golf 2026

      Connecting your GolfJoy (such as the Spica 3 or GDS PRO) to E6 Golf 2026 uses an "Adapter" or "Bridge" system similar to other high-speed camera units. GolfJoy provides the raw tracking data, and the E6 engine renders the simulation. 1. Requirements ...