Connecting the FlightScope device

Connecting the FlightScope device


  1. Power on the Flight​Scope.
  2. Open the Wi-Fi Settings on the PC you want to connect to.
  3.  In the network list, find the FlightScope device by its serial number (S/N for short). This can be found on a label on the back of the device.
  4. Enter the device’s password. If you have not set one up yet, the default password is the device’s serial number starting with the letter “X”. For example, if the S/N is FS X3-001234, the default password would be X3-001234.
  5. Press SELECT to finish the connection to Wi-Fi
  6. Open E6 APEX
  7. Enter the SETTINGS MENU in the upper left-hand corner of the screen.
  8. Select the TRACKING SYSTEMS button.
  9. In the Tracking Systems list, select FLIGHTSCOPE.
  10. Select the FlightScope Model that you own and if it does not connect automatically select the CONNECT button. This must be done for the FlightScope Xi, as it requires manual connection.​


    • Related Articles

    • Connecting the SkyTrak device

      1. Power on your SkyTrak device. 2. Open the Wi-Fi Settings on the PC you want to connect to. 3. In the network list, find the SkyTrak device 4. Enter the device’s password. 5. Press SELECT to finish the connection to Wifi 6. Open E6 APEX 7. Enter ...

    • Connecting the Garmin device

      1. Open E6 APEX 2. Enter the SETTINGS MENU in the upper left-hand corner of the screen. 3. Select the TRACKING SYSTEMS button. 4. In the Tracking Systems list, select Garmin. 5. Power on your Garmin device. 6. Open the GARMIN GOLF App. 7. Click on ...

    • Apex fails to connect to Apogee (Apogee not Connected)

      Issue: You have installed Apex but when trying to select tracking system its showing as not connected. Apogee and E6Connect are connected and working as expected. Cause: When Apex installs it may not set the firewall rules correctly or fails to ...