Windows

1. Open the Wi-Fi settings and select the Wave Wi-Fi network. The Wi-Fi password should be provided to Golfzon users already, but for the case of QA needing it, the password is: wave1234.

2. Once that network connects (although like other tracking system networks, it won't have an internet connection, only a connection to the device),
you can select Golfzon from the menu.

3. Select the IP address listed. There is typically only one, but if you see multiple to choose from, select the address that ends in 1. (Example: 192.168.0.1). Leave the port number set to 2483, which is the default.

4. That is all, you should now be connected.

iOS

On iOS, the connection is slightly different because the network needed to be joined automatically to prevent long wait times for the correct network to show up in the menu.

1. Launch E6, and once at the main menu enter the settings, and navigate to the Tracking system config menu.
2. Select Golfzon.
3. The network will now be created, and you may be prompted by iOS to allow the software to switch to Golfzon's Wave network.
4. If you get a message saying that the connection failed, it still should have been created for you to access, so just open up the settings menu, and select the Wave network.
5. If needed, enter the wave1234 password.
6. Now you should be able to go back to E6, and enter a course to confirm that you are now connected to the device.