Blue Tees RAINMAKER Connection Instructions for E6 Golf 26 and E6 CONNECT

Blue Tees RAINMAKER Connection Instructions for E6 Golf 26 and E6 CONNECT

Symptom:
  1. Needing to connect RAINMAKER device to E6 Golf 26 or E6 CONNECT.
  2. RAINMAKER not connected.
To connect the Blue Tees Rainmaker launch monitor to E6 Golf 26 (or E6 CONNECT) on PC, you connect directly within the E6 software over Bluetooth Low Energy (BLE). You do not need to use the Blue Tees Launch App or Windows Bluetooth settings to pair the unit.
Step-by-Step Setup Guide
  1. Power On Equipment
    • Turn on your Blue Tees Rainmaker launch monitor and your PC.
    • Place the Rainmaker 5 feet directly behind the ball and ensure you have at least 10 feet of ball flight space to your screen/net.
    • (Optional) If using Titleist Pro V1x RCT balls, ensure RB (RCT) mode is turned on in your Rainmaker device settings.
  2. Open E6 Golf / E6 Connect
    • Launch E6 Golf 26 or E6 CONNECT on your PC.
    • Ensure your E6 license is active and logged in.
  3. Configure Tracking Device
    • Go to Settings > Tracking (or Simulator/Hardware options).
    • Select Rainmaker (or Blue Tees) from the list of hardware providers.
  4. Pair the Device
    • Click on LOCAL HOST to highlight it blue, then click the Accept button.
    • Your device should then show as connected.
  5. Verify Connection & Play
    • Enter the Practice Range in E6 to test the connection.
    • Confirm the hardware connection status shows active/connected before hitting shots.