Automatic repair / Windows 10 Boot In Safe Mode / Windows wont load

Automatic repair / Windows 10 Boot In Safe Mode / Windows wont load

If you are not able to get Windows to load you might want to try booting in safe mode.

1. Shut off the computer three times during Windows Boot as soon as you see the throbber (A throbber is an animated graphical control element used to show that a computer program is performing an action in the background. Such as downloading content, conducting intensive calculations or communicating with an external device.)
2. On the third Start Up, Windows will load a “Auto Repair” window. You want select and click on “Advanced Options”.



3. You will now see a “Choose an option” window. You will want to select “Troubleshoot”.

4. In the next window “Advanced options” select “See more recovery options” at the bottom of the window.


5. Select “Startup Settings” in the new window


6. Press “Restart”

7. Once the computer restarts, Press “4” to “Enable the Safe Mode”.



    • Related Articles

    • Reset this PC / Automatic Repair error

      Seeing the error “Automatic Repair error”. 1 . On the “Auto Repair” window. You want select and click on “Advanced Options”. 2. You will now see a “Choose an option” window. You will want to select “Troubleshoot”. 3. In the next window Select reset ...

    • Boot device not found

      Updating the Boot Order in the BIOS Note: To get to the BIOS you’ll need to have the computer turned off completely. As you push the power button on the computer itself, you’ll also repeatedly tap on F12 to bring up what is called the Boot Menu. When ...

    • Update Windows 10 (How To)

      Windows 10 needs to be updated regularly. Press the WINDOWS KEY on your keyboard and type “update” Select “Check For Updates” and follow the instructions on screen. Some updates are not available immediately, until other updates are installed. So ...

    • IRQL error

      IRQL_NOT_LESS_OR_EQUAL means one of two things: driver issues, or a bad Windows Service caused by a backup utility or antivirus scanner. First step is to try and get the computer to load in safe mode. From there you can take a look at what is causing ...

    • Turn ON/OFF Digital Signature Authentication on Windows 7

      Turn ON/OFF Digital Signature Authentication on Windows 7 1. Run Command Prompt (cmd.exe) as Administrator 2. Now type or copy bcdedit.exe –set loadoptions DDISABLE_INTEGRITY_CHECKS 3. bcdedit.exe –set TESTSIGNING ON 4.Restart your computer and this ...